rotary cutter gearbox
rotary cutter gearbox
RC-20 Collection
Specifications
Torque: 1,750 – 3,267 lb.-in.
198 – 369 Nm.
Ratios: one:2.five, 1:two.83
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 16 oz. (.47 L)
Weight: 34 lbs. (fifteen.four kg)
Purposes
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-27 Collection
RC-thirty Sequence
Requirements
Torque: 2,800 – 4,667 lb.-in.
316 – 527 Nm.
Ratios: 1:one.forty seven, one:one.71, one:1.93
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 23 oz. (.sixty eight L)
Fat: 51 lbs. (23.one kg)
Purposes
Finishing Mowers Rotary Cutters
Rotary Slashers Toppers
RC-51 Collection
Technical specs
Torque: two,800 – 4,667 lb.-in.
316 – 527 Nm.
Ratios: one:1.47, one:one.seventy one, one:one.93
Seals: Triple Lip Spring Loaded
Bearings: Tapered Roller/ Deep Groove Ball
Oil Cap: 27 oz. (.eighty L)
Fat: fifty six lbs. (25.4 kg)
Apps
Rotary Cutters Rotary Slashers
Gears: Offered with both straight bevel or spiral bevel gearing.Energy: Hp & Torque based on AGMA formulation for constant duty furthermore a service or load class issue.
Shafting: Different dimensional, metallurgical, and heat-deal with possibilities accessible.
Bearings: Geardrives accessible with different bearing lifestyle options.
Lubrication: Drives available with various lubes depending on working qualities
Substitute Rotary Cutter gearbox, 40hp rated, one-3/eight”-6 spline enter shaft, one.57″ X 12 tapered spline output shaft and 1:1.47 speed up ratio. These gearboxes have a sq. housing configuration and are identical in mounting and ratio to the round configuration gearboxes. These are unique tools gearboxes on the IM402, IM502 and IM602 collection rotary cutters which featured slip clutch PTO shafts. This gearbox will not match the IM400, IM500 and IM60 designs as they have a clean enter shaft! If your gearbox has a 12 spline output shaft and a 1-three/eight” – 6 spline input shaft this gearbox will operate. Bolt sample is four-3/4″ on center hole to hole and 6-3/4″ heart to center of bolt hole on diagonal. The mounting holes type a square bolt pattern.
rotary cutter gearbox
Any lingering inquiries on rotary cutter gearbox, figure out even more right here.