Single and dual reduction planetary gear drives to be used with electric, hydraulic, surroundings motors or mechanical power insight from high velocity, low torque sources to deliver reduced speeds at increased torques. The input aspect has standard SAE pads for electric motor mounting. Obtainable in the three result configurations shown below. Many units could be furnished with an integral parking brake.
Single reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with integral parking input speed is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Products provide 95% power transmission efficiency.

Wheel Drive
Input side has regular SAE pads and splined insight. Output part has hub for mounting vehicle wheel. Free wheel is possible by using the springtime disconnect to disengage the drive shaft. The disengage feature is definitely regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined input. Output side options include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined input. Output side has a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 is offered with or without essential parking brakes. The “SW” Power Wheel provides extra-large tapered roller bearings, a ductile iron hub and temperature treated ring equipment to minimize backlash growth due to wear. The hydraulic planetary drive external bearing nut supplies the ultimate in shaft retention and shaft power. Output can be a spindle shaft or numerous sizes of integral pinion gears.