The EP Greenhouse geared motor is a compact and lightweight reduction gear reducer with an integrated limit switch system that is suitable for assembly of a locally available electric motor. The gear motor is used in manually-managed or climate-controlled ventilation and display screen systems in greenhouses. The quick and easy-to-install EP gear reducer is usually rainproof and windproof. The geared motor has a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise gear reducer for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmitting means that the drive shaft is definitely locked when the decrease gear driver is not running. The completely sealed reduction gearbox comes with an expansion chamber with a diaphragm to keep the gear oil at a low pressure under all circumstances, even at high temps. Thanks to the use of an growth chamber, the gearbox could be installed in any placement. There are no limitations, since there is no need for a bleed plug. The sealed reduction reducer keeps the apparatus essential oil of the gearbox in optimal condition because of its entire operating life time. The gear reducer is ideal for discontinuous use, operating class s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction gear reducer has an FT85 motor assembly flange, on to which a suitable IEC standard motor can simply be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed within an built-in chamber and is enclosed by an impact-resistant plastic material cover. The limit switch system is obtainable and easy to adjust. The limit change system’s maximum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear reducer has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The reducer for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of program of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 a few minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).