Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Air flow Compressor diameter TPI fans. Made to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric electric motor, capacitor and quickness control change is still hooked up however the cord itself is normally detached as observed in the photos. (Discover “Control Notice” below for change type.)
T (See “Software Notice” below for make use of in various other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is definitely½” (0.500″) diameter x 2 ½” long with a collection screw even. There are (4) threaded mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and also to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric powered motor) is Clockwise.
Control Take note: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). These two types of switches both control the engine in the same way (but you possess a rotating knob and you have a pull-chain). If you order several electric motor at a time, we will do our best to supply your order with each one sort of control or the excess.
Application Note: Do NOT use this electric engine in a nonfan program. This is a completely enclosed fan electric engine and designed to have continuous ventilation over the electric motor casing for cooling. The housing isn’t vented and the electric motor will overheat and enter automatic electric fan motor china thermal overload if run in a nonfan system where there isn’t strong ventilation past the engine. (Caution Note: the electrical motor will restart immediately when it cools cool off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans may possibly also overload the engine and lead it to proceed into automated thermal overload. (Your companion blade from another manufacturer may have a steeper blade angle.)
Origin: This electric engine is produced in China.